Ansercoll 5-10-15-20 Parquet Adhesive
Rubber (SBS) based parquet adhesive with natural resins, free of water and aromatic solvents. Open time — about 15 min; Coverage — 1.0–1.5 kg/m² (depends on how absorbent the substrate is). A 1.1 kg pack is enough for roughly 0.7–1.1 m² of parquet (1.0–1.5 kg/m²).
Ansercoll 5-10-15-20 Parquet Adhesive
Ansercoll 5-10-15-20 Plus Construction Adhesive 0.31 l
Solvent-borne SBS rubber construction adhesive in a cartridge, free of aromatic solvents. Open time — about 15 min; Bond strength — min. 1.5 MPa after 1 day.
Ansercoll 5-10-15-20 Plus Construction Adhesive 0.31 l
Coni PUR Plus Gun-Applied Polyurethane Adhesive 750 ml
One-component polyurethane adhesive in a canister, applied with a gun. Yield — up to 12 m² per pack (20 °C); Board repositioning — up to about 10 min (20 °C); Working temperature — from +5 °C to +30 °C.
Coni PUR Plus Gun-Applied Polyurethane Adhesive 750 ml
MS Elastic Polymer Construction Adhesive 290 ml
Elastic MS polymer construction adhesive in a cartridge. Open time — about 35 min; Strength after 24 h — about 3 MPa.
MS Elastic Polymer Construction Adhesive 290 ml
PUR D4 Parquet Repair Adhesive 0.25 l
Foaming polyurethane class D4 adhesive for repairing a squeaking floor without lifting the boards. Full bond — after 2–4 h; Working temperature — from +5 °C to +30 °C.
PUR D4 Parquet Repair Adhesive 0.25 l
Tapicer Spray Contact Adhesive 500 ml
Aerosol contact adhesive for upholstery, foam and textiles. Open time — up to 10 min; Final strength — after 48 h; Application temperature — 15–27 °C.