Coni PUR Plus Gun-Applied Polyurethane Adhesive 750 ml

Name: Coni PUR Plus Gun-Applied Polyurethane Adhesive 750 ml
Brand: Anser
SKU: W-41-73-0
Price: 8.90 EUR
Availability: InStock

One-component polyurethane adhesive in an aerosol can, applied with a gun

8,90 €

Final price (we are not a VAT payer) · pickup in Vilnius is free

Package size: 750 ml

In stock

up to 12 m²
dowelling after 2 h
+5…+30 °C

Wholesale prices and Ansercoll buckets of 5.5 / 13.5 / 23 kg — on request.

Description

One-component polyurethane adhesive in an aerosol can for a foam gun. Bonds insulation boards (EPS, PUR, phenolic foam, mineral wool), plasterboard and cement boards, decorative panels, sheet metal, aerated concrete and porous ceramic blocks.

Excellent adhesion to brick, concrete, plaster, wood, metal, polystyrene, rigid PVC
Good thermal insulation
Up to 12 m² per can (+20 °C)
Board adjustment ~10 min, dowelling after 2 h
Working temperature +5 to +30 °C

Dampen the substrate before use, shake the can vigorously for 20–30 s. Clean fresh adhesive with Ansercleaner, cured adhesive mechanically.

Prices shown are retail. For wholesale prices and volumes, contact us by email or phone.

Benefits

Up to 12 m² from one can
Excellent thermal insulation
Adheres to brick, concrete, plaster, wood, metal, polystyrene and rigid PVC

Where to use

For polystyrene, polyurethane, phenolic foam and mineral wool boards, plasterboard, decorative panels and aerated concrete blocks.

Technical data

Coverage up to 12 m² per can (20 °C)
Dowelling time after 2 h
Board repositioning up to about 10 min (20 °C)
Working temperature from +5 °C to +30 °C

How to use

Warm the can to room temperature and shake it vigorously for 20–30 s. Screw on the gun and hold the can upside down. Dampen the substrate with water before bonding. Apply the adhesive in a wavy bead about 3 cm wide around the perimeter of the board and in a “W” across the middle. Wait 5–8 min, press the board against the wall and hold it for about 1 min. Cut off cured adhesive residue; clean off fresh residue with ANSERCLEANER.

Safety information

Danger

H222 – Extremely flammable aerosol.
H229 – Pressurised container: May burst if heated.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H332 – Harmful if inhaled.
H334 – May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H362 – May cause harm to breast-fed children.
H373 – May cause damage to organs through prolonged or repeated exposure.
H410 – Very toxic to aquatic life with long lasting effects.