Tin of Ansercoll 5-10-15-20 parquet adhesive 1.1 kg on a light oak floor

Ansercoll 5-10-15-20 Parquet Adhesive

1,1 kg
7,50 €
Skip to product information
Tin of Ansercoll 5-10-15-20 parquet adhesive 1.1 kg on a light oak floor
  • Tin of Ansercoll 5-10-15-20 parquet adhesive 1.1 kg on a light oak floor
  • Bucket of Ansercoll 5-10-15-20 parquet adhesive on a herringbone parquet floor
  • Tin of Ansercoll 5-10-15-20 parquet adhesive 1.1 kg on a light oak floor
  • Bucket of Ansercoll 5-10-15-20 parquet adhesive on a herringbone parquet floor
Ansercoll 5-10-15-20 Parquet Adhesive

Anser

Ansercoll 5-10-15-20 Parquet Adhesive

SBS rubber-based parquet adhesive with natural resins, free of water and aromatic solvents

7,50 €

Final price (we are not a VAT payer) · pickup in Vilnius is free

Package size: 1.1 kg

Low stock
Size1,1 kg

Ansercoll 5-10-15-20 Parquet Adhesive

1,1 kg

  • 1.0–1.5 kg/m²
  • open time ~15 min
  • no priming

Wholesale prices and Ansercoll buckets of 5.5 / 13.5 / 23 kg — on request.

Description

Professional parquet adhesive based on modified styrene-butadiene rubber with natural resins. For bonding traditional parquet and wood-based boards (OSB, chipboard) to all common construction substrates, including bitumen-contaminated floors.

  • No primer needed
  • Non-foaming, does not swell the wood
  • Free of water and aromatic solvents
  • Thixotropic – holds the notched trowel pattern
  • Cures without shrinkage; elastic, ageing-resistant joint

Coverage: 1.0–1.5 kg/m² depending on substrate absorbency. Sizes: 1.1 kg for trials and small jobs, 5.5 kg and 23 kg for professionals.

5.5 / 13.5 / 23 kg buckets for professionals – cheaper per kilo. Contact us for B2B pricing.

Prices shown are retail. For wholesale prices and volumes, contact us by email or phone.

Benefits
  • No priming needed
  • Does not swell the wood and does not foam
  • Cures without shrinkage
  • Also suitable for dirty, bitumen-coated substrates (once cleaned and primed)

Technical data
  • Adhesive colour sand
  • Joint colour sand
  • Solids content 72 % ±3
  • Open time about 15 min
  • Joint strength min. 1.0 MPa after 1 day; min. 1.5 MPa after 3 days
  • Viscosity (Brookfield) 40 000 mPa·s ±5 000
  • Consumption 1.0–1.5 kg/m² (depending on how absorbent the substrate is)

The substrate must be level, dry (max. 2 % moisture), clean and sound. Adhesive temperature 18–25 °C, substrate from 15 °C, relative humidity <70 %.

How to use

Apply evenly with a triangular notched trowel: B3 on a non-absorbent substrate, B5 on an absorbent one. Leave an expansion joint of about 1.5 cm between the wall and the parquet; remove the wedges immediately after laying. Clean fresh adhesive with 5-10-15-20 thinner.

Safety information
GHS02 — flame, flammableGHS08 — health hazardGHS07 — exclamation mark, irritantGHS09 — hazardous to the environmentDanger
  • H225 – Highly flammable liquid and vapour.
  • H304 – May be fatal if swallowed and enters airways.
  • H315 – Causes skin irritation.
  • H317 – May cause an allergic skin reaction.
  • H336 – May cause drowsiness or dizziness.
  • H361 – Suspected of damaging fertility or the unborn child.
  • H373 – May cause damage to organs through prolonged or repeated exposure.
  • H411 – Toxic to aquatic life with long lasting effects.
  • EUH066 – Repeated exposure may cause skin dryness or cracking.

Always follow the information printed on the label and the instructions in the safety data sheet.

Delivery and pickup

Pickup in Vilnius — ready within 24 h. Aerosols and solvent-based adhesives are ADR dangerous goods and cannot be sent to parcel lockers.

Documents

Goes well with

Kits — cheaper than buying separately

Two cans of Tapicer Spray contact adhesive 500 ml
Sale

Tapicer Spray 500 ml × 2

Anser

Tapicer Spray 500 ml × 2

15,90 € 17,80 €

2 × 500 ml

In stock

Bought separately 17.80 € · you save 1.90 €